6
ServeRAID™-4x Ultra160 SCSI Controller Device Driver Installation Instructions
6.
Click the Driver tab; then, click Update Driver. The Update Device Driver Wizard
opens.
7.
Click Next.
8.
Verify that Display a list of the known drivers... is checked; then, click Next.
9.
Click Have Disk.
10. In the Copy manufacturer's files from field:
where
a
is the diskette drive letter and
z
is the CD-ROM drive letter.
11. Click OK; then, in the next window, click OK.
12. After the device driver installs, remove the diskette or the CD from the drive and
restart the server.
Installing device drivers for Windows NT 4.0
Use the following instructions when you do one the following:
•
Install device drivers while installing Windows NT 4.0
•
Install
or
update device drivers after installing Windows NT 4.0
Installing device drivers while installing Windows NT 4.0
To install the ServeRAID device driver while installing Windows NT 4.0:
1.
Insert either of the following:
•
The Windows NT startup (boot) diskette into the diskette drive
•
The startable Windows NT CD into the CD-ROM drive;
then, restart the server.
2.
When the message
Setup is inspecting your computer's hardware
configuration...
is displayed, press the F6 key.
3.
After loading some files, Windows displays a screen where you can manually
specify a controller. When this screen appears, press the S key to specify addi-
tional devices.
4.
When prompted in the next window, select Other from the list.
5.
When prompted to insert the
Manufacturer-supplied hardware support
disk
, insert the
IBM ServeRAID Device Drivers
diskette into the diskette drive;
then, press Enter.
For ServeRAID-4M or ServeRAID-4L
controllers
If you are installing from diskette, type:
a:\win2k\4M_4L
If you are installing from CD, type:
z:\win2k\4M_4L
For ServeRAID-4H controllers
If you are installing from diskette, type:
a:\win2k\others
If you are installing from CD, type:
z:\win2k\others
