manualshive.com logo in svg

IBM RELEASE 7.3, Management Manual


Share
Download
background image

•

PVR/Mover Notify Pending - The PVL needs to notify the associated PVR and Mover that the 
drive has been created or deleted.

•

PVR Notify Pending - The PVL needs to notify the associated PVR that the drive has been 
created or deleted.

•

Mover Notify Pending - The PVL needs to notify the associated Mover that the drive has been 
created or deleted.

•

Abort PVR/Mover Notify – The PVL is aborting a pending notification.

Controller ID

. An indication of the adapter/bus that is in the data path to the device. This field is used to 

attempt to mount individual volumes of a set of striped media on different controllers, when possible, to 
prevent contention on the data path.

Polling Interval 

(tape only). The number of seconds to wait between polling requests performed by the 

PVL to determine if a tape or disk is present in the drive. The value for drives located within robotic 
libraries should be set higher than for manually mounted drives, since the PVL will query the drive after 
notification from the PVR that a cartridge has been mounted on it. It is recommended that this field be set 
to 15 seconds for operator-mounted tape drives and 900 (15 minutes) for library-managed tape drives. 
Use -1 to disable polling. Values of 0 to 14 are not valid.

Mounted Volume

. The volume that is currently mounted on this drive. 

Maintenance Date

. The time and date when the drive last had maintenance performed on it. This date 

must be entered manually and is provided for administrative information purposes only.

Drive Error Count

. This field records the number of consecutive Drive Errors (set via the 

Retry Mount 

Time Limit

 mechanism) which have occurred on the drive. When the number of errors equal or exceed 

the PVR 

Drive Error Limit

, the drive will automatically be locked by the PVL. The field can be reset to 

zero administratively using the 

Reset

 button. A successful mount or PVL recycle will also zero the field.

Mounts Since Last Maintenance

. The number of times a volume has been mounted on this drive since 

the last maintenance. Clicking on the 

Reset

 button to the right of this field will reset the value to zero.

Drive Pool ID 

(tape only). If non-zero positive integer value, the 

Drive Pool ID

 will restrict this drive to 

only be scheduled for tape read requests specifying this value. The default 

Drive Pool ID

 is 0 to indicate 

that the drive is not restricted to a particular drive pool. Negative values are not allowed. Changing the 

Drive Pool ID

 in this window can be performed while HPSS servers are up; however, the tape drive must 

be locked and free. See Section 7.3:

 Drive Pools 

on page 218.

Comment

. This field provides a 128 character buffer in the PVL drive metadata which gives the 

administrator the opportunity to associate miscellaneous text with a device/drive. For example, a site may 
want to place a comment in this field that the drive is out of service or being used by another system, etc.

Related Information

Section 16.1.2: 

Tape Management 

on page 368

7.3.  Drive Pools

HPSS provides HPSS end clients the ability to direct tape read I/O requests to a predefined group of tape 
drives referred to as a Drive Pool. This ability helps HPSS administrators manage tape drive scheduling 

HPSS Management Guide

November 2009

Release 7.3 (Revision 1.0)

218

Summary of Contents for RELEASE 7.3





































































































































































































































































































































































































Reviews:

No comments

Related manuals for RELEASE 7.3

TANDBERG Movi 3.0 Reference Manual preview
Movi 3.0
Brand: TANDBERG Pages: 66
TANDBERG Content Server None User Manual preview
Content Server None
Brand: TANDBERG Pages: 14
Adobe ACROBAT 3D Manual preview
ACROBAT 3D
Brand: Adobe Pages: 822
Novell ZENworks Application Virtualization 8.0.1 User Manual preview
ZENworks Application Virtualization 8.0.1
Brand: Novell Pages: 105
Yellowtec b-line Manual preview
b-line
Brand: Yellowtec Pages: 124
SMART SMART Notebook SE Installation Manual preview
SMART Notebook SE
Brand: SMART Pages: 20
Symantec NORTON INTERNET SECURITY - FOR MAC V4 User Manual preview
NORTON INTERNET SECURITY - FOR MAC V4
Brand: Symantec Pages: 28
Symantec CONFLICTMANAGER Reference preview
CONFLICTMANAGER
Brand: Symantec Pages: 54
AMX AXD-CP4/A Specifications preview
AXD-CP4/A
Brand: AMX Pages: 3
AMX AMXUSBLAN Operation/Reference Manual preview
AMXUSBLAN
Brand: AMX Pages: 24
Autodesk AUTOCAD PANDID 2011 - SYSTEM REQUIREMENTS Manual preview
AUTOCAD PANDID 2011 - SYSTEM REQUIREMENTS
Brand: Autodesk Pages: 2
Autodesk AUTOCAD MEP Brochure preview
AUTOCAD MEP
Brand: Autodesk Pages: 6
Autodesk AUTOCAD 2010 - Manual preview
AUTOCAD 2010 -
Brand: Autodesk Pages: 62
Autodesk 466B1-05A761-1304 - AutoCAD Inventor Simulation Suite 2010 Getting Started preview
466B1-05A761-1304 - AutoCAD Inventor Simulation Suite 2010
Brand: Autodesk Pages: 84
Autodesk 22906-010000-9325 - UPG FROM AUTOCAD 2000I-NET BUMP Network Manual preview
22906-010000-9325 - UPG FROM AUTOCAD 2000I-NET BUMP
Brand: Autodesk Pages: 104
FieldServer FS-8704-07 Driver Manual preview
FS-8704-07
Brand: FieldServer Pages: 15
IBM ZVM - FOR LINUX V6 RELEASE 1 Getting Started preview
ZVM - FOR LINUX V6 RELEASE 1
Brand: IBM Pages: 172
Guzik WITE32 Release Notes preview
WITE32
Brand: Guzik Pages: 29

Brands by name

Popular brands

Load more brands