manualshive.com logo in svg

IBM RELEASE 7.3, Management Manual


Share
Download
background image

user does not specify a COS or any hints with the creation request. The global configuration specifies a 
default COS for an entire HPSS installation. Selecting a COS on the storage subsystem configuration 
window allows the global value to be overridden for a particular subsystem.

If the field is blank, the global default COS will be used. If no Classes of Service are configured, this 
value can be updated after the Classes of Service are in place.

Subsystem Name.

 The descriptive name of the storage subsystem. This field may be set only when the 

storage subsystem is created. The name should be unique and informative. It can contain a character 
string up to 31 bytes long. The default value is “Subsystem #<ID>”.

Database Name.

 The name of the database to be used to store the metadata for the storage subsystem.

Gatekeeper.

  The default value is “None”.

Advice - If an appropriate Gatekeeper has not yet been configured, simply leave this configuration entry 
blank. It can be updated after the Gatekeeper is in place.

Allowed COS list.

 A list of Classes of Service that can be used by this subsystem. To allow a COS to be 

used by this subsystem, the corresponding checkbox must be selected in the Allow column of the list. At 
least one COS must always be selected.  The user will not be permitted to de-select the COS defined to 
be the Default Class of Service. If this subsystem configuration does not have a Default Class of Service 
defined, then the COS chosen as the Global Configuration’s Default Class of Service cannot be de-
selected.

Note that a newly created COS will not appear in the selection list until the Core Server and 
Migration Purge Server associated with the subsystem have been recycled. When new Classes of 
Service are added, the initial allowed state for that COS is determined by the current setting for 
the other Classes of Service. If all previous Classes of Service were allowed, the new COS will 
be allowed. Otherwise, the new COS will be disallowed.

Advice - By default, the servers in a subsystem are able to use any configured COS. This table allows an 
administrator to prevent a subsystem from using particular Classes of Service.

When a new Class of Service is added to a system, it will automatically be enabled for all subsystems 
which have no disabled Classes of Service. It will be disabled in all other subsystems. If this is not the 
desired configuration, the COS will have to be allowed/disallowed for each subsystem individually.

Disallowing all Classes of Service in a subsystem is not permitted.

Metadata Space Warning Threshold. T

he Core Server in this subsystem will issue a warning alarm 

periodically and set its Opstate to Major when the percentage of used space in any DB2 tablespace in this 
subsystem’s database exceeds this value.

Metadata Space Critical Threshold. 

The Core Server in this subsystem will issue a critical alarm 

periodically and set its Opstate to Critical when the percentage of used space in any DB2 tablespace in 
this subsystem’s database exceeds this value.

Metadata Space Monitor Interval. 

The Core Server for this subsystem will check the metadata usage 

statistics at the indicated interval, specified in seconds.  If a value of 0 is specified, the Global 
Configuration setting will be used for this storage subsystem. The minimum value for this field is 1800 
seconds (30 minutes).

HPSS Management Guide

November 2009

Release 7.3 (Revision 1.0)

78

Summary of Contents for RELEASE 7.3





































































































































































































































































































































































































Reviews:

No comments

Related manuals for RELEASE 7.3

FARONICS DEVICE FILTER MAC Getting Started Manual preview
DEVICE FILTER MAC
Brand: FARONICS Pages: 4
Adobe Acrobat 7.0.5 Manual preview
Acrobat 7.0.5
Brand: Adobe Pages: 122
Waves Software Audio Processor DLA User Manual preview
Software Audio Processor DLA
Brand: Waves Pages: 6
Adobe 65014293 - Photoshop CS4 - Mac Manual preview
65014293 - Photoshop CS4 - Mac
Brand: Adobe Pages: 87
Olympus Master 4.1 Operating Instructions Manual preview
Master 4.1
Brand: Olympus Pages: 149
I-Data ReRouter Installation & Operator’S Manual preview
ReRouter
Brand: I-Data Pages: 79
MACROMEDIA FLASH 8-LEARNING ACTIONSCRIPT 2.0 IN FLASH Manual preview
FLASH 8-LEARNING ACTIONSCRIPT 2.0 IN FLASH
Brand: MACROMEDIA Pages: 830
AMX I!-TIMEMANAGER Instruction Manual preview
I!-TIMEMANAGER
Brand: AMX Pages: 16
Emerson Smart Wireless Navigator Reference Manual preview
Smart Wireless Navigator
Brand: Emerson Pages: 22
Emerson Site Manager User Manual preview
Site Manager
Brand: Emerson Pages: 130
Lucent Technologies CentreVu User Manual preview
CentreVu
Brand: Lucent Technologies Pages: 198
JVC Blank Media LYT1015 Instructions Manual preview
Blank Media LYT1015
Brand: JVC Pages: 22
JVC ImageMixer 1.7 Instructions Manual preview
ImageMixer 1.7
Brand: JVC Pages: 43
JVC JLIP VIDEO CAPTURE Instructions Manual preview
JLIP VIDEO CAPTURE
Brand: JVC Pages: 56
JVC GR-DVL500U - Digital Camcorder Instructions Manual preview
GR-DVL500U - Digital Camcorder
Brand: JVC Pages: 72
JVC GZMG27US - Everio Camcorder - 680 KP Instructions Manual preview
GZMG27US - Everio Camcorder - 680 KP
Brand: JVC Pages: 72
JVC GZ-MG77U - Everio Camcorder - 2.18 MP Instructions Manual preview
GZ-MG77U - Everio Camcorder - 2.18 MP
Brand: JVC Pages: 72
JVC Digital Photo Navigator ImageMixer with VCD LYT1116-001A Instructions Manual preview
Digital Photo Navigator ImageMixer with VCD LYT1116-001A
Brand: JVC Pages: 50

Brands by name

Popular brands

Load more brands