Chapter 2. Diagnostics Overview
Model 270 systems use an integrated set of software diagnostic procedures to facilitate
isolation of failing components and system maintenance. This book, along with the
RS/6000 and
Eserver
pSeries Diagnostics Information for Multiple Bus Systems
, are
the basis of the diagnostic procedures for the system. In particular, the following
sections in this book are important for the trained service representative to understand
and use when isolating a failure on the system:
v
Chapter 4, “Checkpoints”, on page 71
v
Chapter 5, “Error Code to FRU Index”, on page 93
v
Chapter 6, “Loading the System Diagnostics”, on page 147
v
Chapter 10, “Parts Information”, on page 271
The manufacturer recommends that systems configured with 4 GB of memory or
greater have access to a 4 mm or 8 mm tape drive for submission of system dump
information if required. This function can be accomplished through locally-attached or
network-attached devices, as appropriate.
Maintenance Analysis Procedures (MAPs)
Maintenance analysis procedures (MAPs) guide the trained service person through the
system. These MAPs are the entry point for all isolation and error-recovery procedures.
The MAPs are consistent with existing procedures and methods. The system uses a set
of integrated procedures, mentioned earlier, to which the MAPS are the primary entry
point.
The MAPS are as follows:
v
Entry MAP
v
Quick Entry MAP
v
Problem Determination MAP
v
Power MAP
v
Minimum Configuration MAP
The Entry Map is the starting point for problem determination. The purpose of this MAP
is to quickly point to the appropriate MAP or service reference information either in this
book, or in the common book set, which includes the
RS/6000 and
Eserver
pSeries
Diagnostics Information for Multiple Bus Systems
and the
PCI Adapter Placement
Reference
.
The Quick Entry MAP is a subset of the Entry MAP and helps to save time for some
types of problems.
The Problem Determination MAP provides a structured analysis method to get an error
code if one is not provided by the customer, or if diagnostics cannot be loaded.
21
Summary of Contents for RS/6000 44P Series 270
