Chapter 3. Error Code to FRU Index
The Error Code to FRU Index lists error symptoms and possible causes. The most
likely cause is listed first. Use this index to help you decide which FRUs to replace
when you are servicing the system.
If the codes in the following tables indicate a device which is present more than once
in the server, a location code is needed to specify which device generated the error.
Go to “Step 1020-3” on page 2-8 to display the System Management Services error
log and obtain a location code. Location code descriptions can be found under
Chapter 4, “Location Codes” on page 4-1.
Once you have the location code, see Chapter 8, “Parts Information” on page 8-1
for the part number.
Notes:
1. If more than eight digits are displayed in the operator panel, use only the first
eight digits to find the error in the tables. The digits that display beyond the first
eight digits are location codes that can assist you in diagnosing the problem.
See Chapter 4, “Location Codes” on page 4-1.
2. Licensed programs frequently rely on network configuration and system
information stored on the VPD on the operator panel. If the MAPs indicate that
the operator panel should be replaced, swap the VPD from the old operator
panel to the new one. If the old VPD module has to be replaced, call technical
support for recovery instructions. If recovery is not possible, notify the system
owner that new keys for licensed programs may be required.
If you replace FRUs and the problem is still unresolved, go to “Step 1540-1” on
page 2-18, unless otherwise indicated in the tables. If you replace FRUs and the
problem has been resolved, go to
"
MAP 0410: Repair Checkout
"
in the Diagnostics
Information for Multiple Bus Systems, unless otherwise indicated in the tables.
Error Code
Function
/Description
Repair Action/Possible Failing FRU
20A80xxx
Remote Initial
program load
(RIPL) errors
20A80000
Insufficient
information to boot.
Verify the IP address.
20A80001
Client IP address is
already in use by
another network
device.
Change IP address.
Chapter 3. Error Code to FRU Index
3-1
All manuals and user guides at all-guides.com
Summary of Contents for RS/6000 7046 B50
