IBM System Cluster 1350 Installation And Service Download

Page: 88 / 170

Adapter device driver not configured:

If the device driver is not configured, and

there are no adapter hardware problems reported, go to “Linux” on page 72 to
continue with the problem determination process.

CSM checks

Events not logged or actions not taken:

Using the ERRM CLI, monitor the

AnyNodeProcessorsIdleTime

condition on specific managed nodes with the

LogEventsAnyTime

response while causing arm and rearm events. If arm and rearm

events are not observed at the management server for managed nodes which are
currently up and reachable from the management server, follow problem
determination section in Monitoring HOWTO located at: http://www-
1.ibm.com/servers/eserver/clusters/library/csmadm.html

Differences in node lists:

Output from command

CT_CONTACT=<ManagedNodeName> lsrsrc IBM.[Host|FileSystem]

when run

on the management node is not the same as when run on the managed node.
Likely configuration or network problem, follow problem determination section in
Monitoring HOWTO located at: http://www-
1.ibm.com/servers/eserver/clusters/library/csmadm.html

netstat output incomplete:

The command netstat -an | grep rmc on the

management server does not show

ESTABLISHED TCP

connections to each

currently managed node which is up. Follow problem determination section in
Monitoring HOWTO located at: http://www-
1.ibm.com/servers/eserver/clusters/library/csmadm.html

RMC not running:

The command lssrc -ls ctrmc shows that RMC is not running

on the management server. Follow problem determination section in Monitoring
HOWTO located at: http://www-
1.ibm.com/servers/eserver/clusters/library/csmadm.html

lsrsrc reports errors:

The command lsrsrc -ab IBM.[Host|FileSystem]’ which

checks that HostRM and FSRM will run on the management server reports errors.
Follow problem determination section in Monitoring HOWTO located at:
http://www-1.ibm.com/servers/eserver/clusters/library/csmadm.html

lsaudrec reports errors:

The command lsaudrec which checks that AuditRM will

run on the management server reports errors. Follow problem determination
section in Monitoring HOWTO located at: http://www-
1.ibm.com/servers/eserver/clusters/library/csmadm.html

Predefined conditions not shown:

The lscondition and lsresponse commands

when run on the management server do not show pre-defined conditions and
responses. Follow problem determination section in Monitoring HOWTO located
at: http://www-1.ibm.com/servers/eserver/clusters/library/csmadm.html

Commands or file replication fails:

CSM commands fail or CFM file replication

fails. Follow problem determination section in Overview HOWTO located at:
http://www-1.ibm.com/servers/eserver/clusters/library/csmadm.html and FAQs,
Hints, and Tips section in Set-Up HOWTO located at: http://www-
1.ibm.com/servers/eserver/clusters/library/csmsetup.html

rpower or rconsole commands fail:

CSM rpower and rconsole commands fail.

Follow problem determination in Remote Control HOWTO located at:
http://www-1.ibm.com/servers/eserver/clusters/library/csmremot.html

Installation and Service