10.
“Configure Library: IPSec” on page 5-54
11.
“Entering User Access Information using the Web User Interface” on page 4-31
12.
“Entering Date and Time using the Web User Interface” on page 4-33
13.
“Configuring Logs and Traces using the Web User Interface” on page 4-33
14.
“Entering Email Notification Information using the Web User Interface” on
page 4-34
15.
“Configuring SNMP Settings” on page 4-34
16.
“Testing Encryption Configuration for Library Managed Encryption” on page
4-35
17.
“Restoring Factory Default Settings using the Web User Interface” on page
4-35
18.
“Logging out of the Web User Interface” on page 2-8
19.
“Setting the Operator Control Panel Access PIN using the Operator Control
Panel” on page 5-25
Establishing Remote Access to Your Library
Static library network settings must be entered using the Operator Control Panel
before the library can be accessed remotely using the Web User Interface. If your
system is serviced by DHCP (Dynamic Host Configuration Protocol) server, the
network parameters will be automatically set. Once remote access has been
established, you can complete the configuration of your library using the Web User
Interface.
1.
Access the
Configure
menu using the Operator Control Panel.
a.
From the screen that shows the library logo (Home screen), press either the
UP or DOWN button to get to the Main Menu.
b.
Press the DOWN button to select
Configure
.
c.
Press the SELECT button to display the
Configure
menu.
2.
Press the DOWN button to highlight the
Network
menu.
3.
Press the SELECT button to display the
Network
screen.
4.
Select IP STACK, and press the SELECT button to highlight the Internet
Protocol field.
a.
Press the DOWN or UP button to scroll through the Internet Protocol
options.
b.
Press the SELECT button on the desired Internet Protocol.
If you select IPv6 protocol, the Configure Network menu will include options
for Stateless Autoconfig and Prefix length.
v
Stateless Autoconfig:
– Press the DOWN button to highlight Stateless Autoconfig.
– Press the SELECT button to highlight the Stateless Autoconfig option
field.
– Press the DOWN button to scroll through the Stateless Autoconfig
options.
– Press the SELECT button to apply the option.
v
Prefix Length:
– Press the DOWN button to highlight Prefix Length.
– Press the SELECT button to highlight the Prefix Length option field.
– Press the UP or DOWN buttons to scroll through the Prefix Length
digits.
– Press the SELECT button to apply the Prefix Length digits.
Chapter 4. Installation and Configuration
4-19
Summary of Contents for System Storage TS3100
