2.
Make sure that the IMM Ethernet-over-USB
interface is enabled.
3.
Reinstall the RNDIS or cdc_ether device driver for
the operating system.
4.
Disable the watchdog.
5.
Check the integrity of the installed operating
system.
40000028-00000000
Management Controller Test
Alert Generated by [arg1].
Explanation:
This message is for the use case where
a user has generated a Test Alert.
Internal Event:
No
Severity:
Info
Alert Category:
System - other
Serviceable:
No
CIM Information: Prefix:
IMM and
ID:
0040
SNMP Trap ID:
22
Automatically notify Support:
No
User response:
Information only; no action is
required.
40000029-00000000
Security: Userid: [arg1] had
[arg2] login failures from an SSH client
at IP address [arg3].
Explanation:
This message is for the use case where
a user has failed to log in to a Management Controller
from SSH.
Internal Event:
No
Severity:
Info
Alert Category:
System - Remote Login
Serviceable:
No
CIM Information: Prefix:
IMM and
ID:
0041
SNMP Trap ID:
30
Automatically notify Support:
No
User response:
Complete the following steps until the
problem is solved:
1.
Make sure that the correct login ID and password
are being used.
2.
Have the system administrator reset the login ID or
password.
4000002a-00000000
[arg1] firmware mismatch
internal to system [arg2]. Please
attempt to flash the [arg3] firmware.
Explanation:
This message is for the use case where
a specific type of firmware mismatch has been detected.
Internal Event:
No
Severity:
Error
Alert Category:
System - Other
Serviceable:
No
CIM Information: Prefix:
IMM and
ID:
0042
SNMP Trap ID:
22
Automatically notify Support:
No
User response:
Reflash the IMM firmware to the
latest version.
4000002b-00000000
Domain name set to [arg1].
Explanation:
Domain name set by user
Internal Event:
No
Severity:
Info
Alert Category:
none
Serviceable:
No
CIM Information: Prefix:
IMM and
ID:
0043
SNMP Trap ID:
Automatically notify Support:
No
User response:
Information only; no action is
required.
4000002c-00000000
Domain Source changed to
[arg1] by user [arg2].
Explanation:
Domain source changed by user
Internal Event:
No
Severity:
Info
Alert Category:
none
Serviceable:
No
CIM Information: Prefix:
IMM and
ID:
0044
SNMP Trap ID:
Automatically notify Support:
No
User response:
Information only; no action is
required.
4000002d-00000000
DDNS setting changed to
[arg1] by user [arg2].
Explanation:
DDNS setting changed by user
Internal Event:
No
Severity:
Info
Alert Category:
none
Serviceable:
No
CIM Information: Prefix:
IMM and
ID:
0045
40000028-00000000 • 4000002d-00000000
38
System x iDataPlex dx360 M4 Types 7912 and 7913: Problem Determination and Service Guide
Summary of Contents for System x iDataPlex dx360 M4 7912
