IBM Tape Library Magstar 3494 Operator'S Manual Download

Page: 295 / 378

Table 12. DFSMS Messages Based on Library Failure or Exception Conditions (continued)

Resulting Console Message

Action

CBR3759E Library

library-name safety enclosure

interlock open.

One of the enclosure doors to the library

library-name is

open. The library is in pause mode.

This message is retained on the console until the safety
interlocks are closed.

1. If an operator is performing an operation that involves

entering the enclosure, no action is necessary.

2. If someone could be entering the enclosure without

authorization, contact your site security. Intervention
at the library is required to return the library to auto
mode.

CBR3760E Library

library-name vision system not

operational.

Key components of the vision system of library
library-name have failed. The library cannot read the
external labels on cartridges. Processing of audit or eject
requests cannot be performed. Also, volumes cannot be
added to the library because their external labels cannot
be read. Other requests continue to be accepted and
performed.

This message is retained on the console until the vision
system is operational again.

1. Contact your service representative to repair the

library vision system.

2. Resubmit audit or eject requests when the vision

system is operational.

CBR3761E Library

library-name library manager

offline.

Library

library-name started the process of going offline

as the result of an operator at the library manager
requesting the library move to the offline state. All
requests that have already been accepted by the library
manager are completed normally. No other requests are
accepted.

1. Determine why the library manager was placed in the

offline state.

2. If a repair action is required, contact your service

representative.

CBR3762E Library

library-name intervention required.

One or more conditions in library

library-name requires

operator intervention to resolve. Library function requests
continue to be accepted and executed, if possible. If this
message is accompanied by CBR3757E Library
library-name in paused mode operational state, the
intervention condition caused automated operations to be
stopped.

This message is retained on the console until all
intervention-required conditions have been cleared.

1. Go to the library and follow the instruction for the

intervention-required condition specified on the library
manager operator console. See “Intervention
Required Conditions and Actions” on page 282 for the
intervention-required conditions.

2. After all conditions are resolved, return the library to

auto mode, if required.

CBR3763E Library

library-name library manager check

1 condition.

The library manager detected a severe failure condition in
library

library-name. All requests that were accepted by

the library manager are lost.

1. Go to the library and see if the library manager is

trying to recover. If it is, the library manager console
is displaying an initialization message. If it is not, it is
displaying an execution or fatal error message.

2. If the library manager recovers, resubmit all

outstanding library requests or jobs.

3. If it does not recover, contact your service

representative.

Chapter 8. Problem Determination Procedures

273