Troubleshooting Charts
Problem
Action
The screen is unreadable
or distorted.
Make sure that:
The display driver is installed correctly by doing the following:
1. Click on Start.
2. Move the cursor to Settings and Control Panel.
3. Click on Control Panel, and then double-click on Display.
4. Select the Settings tab in the “Display Properties” window.
5. Click on Advanced....
6. Click on the Adapter tab.
Make sure that it shows “NeoMagic MagicGraph 128XD.”
The monitor is set correctly by doing the following:
1. Click on the Advanced... button in the Settings tab in the “Display
Properties” window.
2. Click on the Monitor tab.
3. Make sure you choose the correct monitor.
4. Click on OK to close the window.
The refresh rate is correctly selected by doing the following:
1. Click on the Adapter tab.
2. Select the correct refresh rate for your monitor.
If you are not sure, select Optimal.
If the settings are correct, run the tests described in the manual supplied with
the external monitor. If the tests show that the external monitor is OK, have the
computer serviced.
Wrong characters appear
on the screen.
Did you install the operating system or application program with the correct
procedure?
If you did, have the external monitor serviced.
Port Replicator Problems
Problem
Action
The computer hangs
when you power on or
resume operation.
Make sure that:
The AC Adapter is connected to the port replicator.
The power-on indicator of the port replicator is on.
The computer is securely attached to the port replicator.
If there is still a problem, have the port replicator serviced.
Chapter 4. Solving Computer Problems
125
Title: C79FPMST CreationDate: 06/22/98 12:26:52