Using the Security Screw
Using the Security Screw
You can use the security screw shipped with your computer to
prevent the hard disk drive from being removed easily.
To replace the coin screw with the security screw, do as follows:
1
Power off the computer; then disconnect the AC Adapter and
all cables from the computer.
2
Turn the computer over, and remove the screw with a coin.
3
Install the security screw and tighten it with a 2.5-mm allen
wrench.
4
Turn the computer back to its original position. Connect the
AC Adapter; then power on the computer.
Chapter 3. Protecting Your Computer
85
Title: C79FPMST CreationDate: 06/22/98 12:26:52
