Troubleshooting Charts
Problem
Action
The serial connector does
not work.
Make sure that the serial connector is enabled by doing the following:
For Windows 98:
1. Start the ThinkPad Configuration program.
2. Click on Serial Port (
).
3. Select Enable.
4. Click on Device Manager.
5. Check the ports in the “Device Manager” window and make sure the
settings are correct.
6. Click on OK.
For Windows NT:
1. Start the ThinkPad Configuration program.
2. Click on Serial Port (
).
3. Select Enable; then select COM1, COM2, COM3, or COM4.
4. Click on OK.
128
IBM ThinkPad 560Z User's Reference
Title: C79FPMST CreationDate: 06/22/98 12:26:52
All manuals and user guides at all-guides.com