Installing Options in the Diskette Drive Compartment
Installing Options in the Diskette Drive Compartment
You might need to remove the option cover and the diskette drive
bezel (on the front of the computer) when you install options in the
diskette drive compartment. To remove the option cover and bezel,
do the following:
Warning:
To prevent damage to the
diskette drive, make sure the AC
Adapter is disconnected from the
computer.
The diskette drive is a very
delicate device that needs careful
handling. Do not press on, drop,
or apply any shock to the
diskette drive while it is removed
from the computer.
1
Turn off the computer; then disconnect the AC Adapter
and all cables from the computer.
2
Open the LCD; then open the keyboard.
3
Make sure that no diskette is in the drive; then lift the
diskette drive handle with the plastic tape, and remove
the diskette drive.
4
Insert a coin between the option cover and computer.
150
IBM ThinkPad 755CX User's Guide
All manuals and user guides at all-guides.com
all-guides.com
