Bit 2
This bit indicates whether the binary-coded-decimal (BCD)
or binary format is used for time-and-date calendar
updates. If set to 1, this bit indicates binary format. The
system initializes this bit to 0.
Bit 1
This bit indicates whether the hours byte is in 12-hour or
24-hour mode. If set to 1, this bit indicates the 24-hour
mode. The system initializes this bit to 1.
Bit 0
If set to 1, this bit enables the daylight-saving-time mode.
If set to 0, this bit disables the daylight-saving-time mode,
and the clock reverts to standard time. The system
initializes this bit to 0.
Status Register C (Hex 00C)
Figure
2-18. Status Register C (Hex 00C)
Bit
Function
7
Interrupt request flag
6
Periodic interrupt flag
5
Alarm interrupt flag
4
Update-ended interrupt flag
3–0
Reserved
Note: Interrupts are enabled by bits 6, 5, and 4 in status register B.
Bit 7
If set to 1, this bit indicates that an interrupt has
occurred; bits 6, 5, and 4 indicate the type of interrupt.
Bit 6
If set to 1, this bit indicates that a periodic interrupt has
occurred.
Bit 5
If set to 1, this bit indicates that an alarm interrupt has
occurred.
Bit 4
If set to 1, this bit indicates that an update-ended
interrupt has occurred.
Bits 3–0
These bits are reserved.
Status Register D (Hex 00D)
Figure
2-19. Status Register D (Hex 00D)
Bit
Function
7
Valid RAM
6–0
Reserved
2-24 System Board
Summary of Contents for ThinkPad 770
Page 1: ...05L1739 S05L 1739 00...
Page 6: ...vi...
Page 10: ...x Preface...
Page 148: ...IBM Part Number 05L1739 Printed in the United States of America...
