d)
To attach the tape backup unit,
do the following:
Insert the tape backup unit into
the 1-inch-high compartment.
Leave enough space in the back
of the device so the cables can
be connected.
Insert the two connectors
1
of
the cables in the Dock II to the
corresponding connectors of the
tape backup unit.
While pressing the connected
cables down so that they are not
above the tape backup unit,
push in the unit until it
completely stops and is latched.
Latch
If you need to remove
devices, you must release
the latch. See “Releasing the
Latch” on page 71.
1
5.
If the device to install is a
removable-media device (the
CD-ROM drive or the tape
backup unit), remove the blank
bezel from the 1-inch-high drive
location on the top cover.
See “Removing the Blank Bezel for the 1-Inch-High and
Half-High Drives” on page 69.
50
IBM ThinkPad Dock II User's Guide
Title: C78JAMST CreationDate: 05/06/94 19:15:58
All manuals and user guides at all-guides.com
all-guides.com
