Installing and Removing Devices in the Half-High Drive
Space
This section describes the procedures for installing and removing
devices in the half-high drive space.
Installing Devices
To install devices in the half-high drive space, do the following:
1.
Remove the top cover.
See “Removing the Top Cover” on page 64.
2.
If the device to install is in a
static-protective package,
carefully remove it from the
package.
See “Handling Internal Options” on page 38 for their
handling.
3.
If the device to install is the IDE
device, attach it to its optional
installation kit.
See the manual that came with the kit for the attachment
guide.
4.
Attach the devices.
Cable Connectors
If cable connectors are
fastened together with a
twist-tie, undo the twist-tie
and separate them.
Go to the applicable step.
Device to Install
Go to Step
CD-ROM drive
4a on page 53
IDE device
4b on page 54
SCSI device
4c on page 55
52
IBM ThinkPad Dock II User's Guide
Title: C78JAMST CreationDate: 05/06/94 19:15:58
All manuals and user guides at all-guides.com
