The computer exits hibernation mode and resumes
operation when the power-on switch is pressed. When
power is turned on, the hibernation file in the boot record
on the hard disk drive is read and the system status is
restored from the hard disk drive.
The power switch must be pressed to cause the computer
to resume operation from hibernation mode.
How to Create the Hibernation Function:
Do as
follows:
v
Turn off the computer.
v
Connect the USB diskette drive to the computer.
v
Insert the hibernation utility diskette into the diskette
drive (you can create the diskette using the Diskette
Factory).
v
Turn on the computer.
v
Follow the instructions on the screen.
Note:
If you change the memory size, you need to
recreate the hibernation file or partition. For
partition-based hibernation, use the hibernation
utility to delete the partition first before creating a
new one.
18
ThinkPad s30, s31
