Using the locks and the security screw
Using the locks and the security screw
Attaching the mechanical lock
You can attach a mechanical lock to your computer, to help prevent
it from being removed without your permission.
Attach a mechanical lock to the keyhole of the computer; then secure
the chain on the lock to a stationary object. Refer to the instructions
provided with the mechanical lock.
Note:
You are responsible for evaluating, selecting, and
implementing locking devices and security features. IBM
makes no comments, judgments, or warranties on the
function, quality, or performance of locking devices and
security features.
Using the security screw
The security screw shipped with your computer can help prevent the
hard-disk drive from being removed.
To replace the coin screw with the security screw, do as follows:
1. Turn off the computer; then disconnect the ac adapter and all
cables from the computer.
2. Remove the screw with a coin; then install the security screw,
and tighten it with a 2.5-mm allen wrench.
3. Connect the ac adapter; then turn on the computer.
Chapter 2. Protecting your computer
15
