a.
Click the
Settings
tab.
b.
Check whether the color depth and resolution are set correctly.
c.
Click
Display Type...
d.
Make sure
″
RAGE MOBILITY-M AGP
″
is shown in the Display Type
window.
e.
Click
OK.
f.
Click the
Test
button in the Settings window.
g.
Make sure the output is displayed correctly.
Problem:
Incorrect characters appear on the screen.
Solution:
Did you install the operating system or application program
correctly? If they are installed and configured correctly, have the computer
serviced.
Problem:
The screen stays on even after you turn off your computer.
Solution:
Press and hold the power switch for 4 seconds or longer to turn off
your computer; then turn it on again.
Problem:
Missing, discolored, or bright dots appear on the screen every time
you turn on your computer.
Solution:
This is an intrinsic characteristic of the TFT technology. Your
computer’s display contains multiple thin-film transistors (TFTs). A small
number of missing, discolored, or bright dots on the screen might exist all the
time.
Battery problems
Problem:
The battery pack cannot be fully charged by the power-off method
in the standard charge time for your computer.
Solution:
The battery pack might be over-discharged. Do the following:
1.
Turn off the computer.
2.
Make sure that the over-discharged battery pack is in the computer.
3.
Connect the ac adapter to the computer and let it charge.
If the battery pack cannot be fully charged in 24 hours, use a new battery
pack.
If the optional Quick Charger is available, use it to charge the over-discharged
battery pack.
Chapter 2. Solving computer problems
23
