Safety information
DANGER
Electric current from power, telephone, and communication cables is
hazardous. To avoid shock hazard, connect and disconnect cables as
shown below when installing, moving, or opening the covers of this
product or attached devices. If a 3-pin power cord is provided with this
products, it must be used with a properly grounded outlet.
To Connect
Turn everything OFF.
Turn everything OFF.
First, attach all cables to devices.
Attach the signal cables to the
receptades
Attach the power cord to an
outlet.
Turn the device ON
To Disconnect
First, remove the power coed
from the outlet.
Remove the signal cables from
the receptades.
Remove all cables from device.
© Copyright IBM Corp. 2001
v