Go to the Subsystem Management window and select
View
→
Storage Subsystem
Profile
. When the Storage Subsystem Profile window opens, select the
All
tab and
scroll through the Profile For Storage Subsystem list to locate the following
information.
Note:
The Profile For Storage Subsystem list contains all the profile information for
the entire subsystem. Therefore, it may be necessary to scroll through a
large amount of information to locate the firmware version numbers.
DS5100 and DS5300 Storage Subsystem
v
NVSRAM version
v
Firmware version
Drives
v
Firmware version
v
ATA translator card firmware version (SATA E-DDMs only)
Note:
The ATA translator card firmware and drive firmware are typically
packaged together as a single drive firmware upgrade file.
ESM
v
ESM card firmware version
Method Two:
Complete the appropriate procedure to obtain the specified firmware version for
Storage Manager version 10.50.xx.xx and earlier.
To obtain the controller firmware version:
Right-click the Controller icon in the Physical View pane of the Subsystem
Management window and select
Properties
. The Controller Enclosure
properties window opens and displays the properties for that controller.
You must perform this step for each individual controller.
To obtain the drive firmware (and ATA translator card firmware) version:
Right-click the Drive icon in the Physical View pane of the Subsystem
Management window and select
Properties
. The Drive Properties window
opens and displays the properties for that drive.
You must perform this step for each individual drive.
To obtain the ESM and drive enclosure component firmware versions:
1. In the Physical View pane of the Subsystem Management window, click
the Drive Enclosure Component icon, which is the icon furthest to the
right. The Drive Enclosure Component Information window opens.
2. Click the ESM icon in the left pane. The ESM information displays in the
right pane of the Drive Enclosure Component Information window.
3. Locate the firmware version of each ESM in the drive enclosure.
If you have Storage Manager version 10.60.xx.xx:
In the Physical View pane of the Subsystem Management window, click on
any component, such as Controller (for Controller firmware), Drive (for drive
and ATA translator firmware), or View enclosure component (for ESM
firmware and ESM configuration settings) in the left pane of this window.
The component properties are listed in the right pane of this window.
Repeat this step for each component.
24
IBM System Storage DS5100 and DS5300 Storage Subsystem: Installation, User’s, and Maintenance Guide