Hard Loop ID
If the Adapter Hard Loop ID setting is enabled, the adapter attempts to use
the ID specified in this setting. The default ID is 0.
Selectable boot settings
Though you can access this option from the Configuration Settings menu, do not
change the settings as booting from Fibre Channel is not supported.
Restore default settings
You can access this option from the Configuration Settings menu. It restores the
FAStT Host Adapter default settings.
Raw NVRAM data
This option displays the adapter’s NVRAM contents in hexadecimal format. This is a
QLogic troubleshooting tool; you cannot modify the data.
Advanced adapter settings
You can access this option from the Configuration Settings menu. The default
settings for the FAStT Host Adapter are listed in Table 37 and described in the
following paragraphs.
Table 37. Advanced adapter settings
Setting
Options
Default
Execution Throttle
1-256
256
Fast Command Posting
Enabled or Disabled
Enabled
>4 GByte Addressing
Enabled or Disabled
Disabled
LUNs per Target
0, 8, 16, 32, 64, 128, 256
0
Enable LIP Reset
Yes or No
No
Enable LIP Full Login
Yes or No
Yes
Enable Target Reset
Yes or No
Yes
Login Retry Count
0-255
30
Port Down Retry Count
0-255
30
Drivers Load RISC Code
Enabled or Disabled
Enabled
Enable Database Updates
Yes or No
No
Disable Database Load
Yes or No
No
IOCB Allocation
1-512 buffers
256 buffers
Extended Error Logging
Enabled or Disabled
Disabled
Execution Throttle
Specifies the maximum number of commands executing on any one port.
When a port’s execution throttle is reached, no new commands are
executed until the current command finishes executing. The valid options
for this setting are 1-256. The default (optimum) is 256.
Fast Command Posting
Decreases command execution time by minimizing the number of interrupts.
The default is Enabled.
156
NAS Gateway 300 User’s Reference
Summary of Contents for TotalStorage NAS 300
