User ID:
Administrator
Password:
password
Set each node’s date and time using the Windows
®
Control Panel.
3.
Change the computer name of the node (optional)
Set a unique name for each node. For example:
NAS300GPrimary
and
NAS300GJoining
. Then reboot both nodes.
4.
Set up storage
To set up storage, you will need the following tools: WWN Fibre Utility to
associate logical drives (LUNs) on the fibre-attached storage with the NAS
Gateway 300, and Disk Management to write signatures, create partitions
and assign drive letters. (The LUNs on the fibre-attached storage must be
configured according to its documentation.)
For detailed instructions, refer to “Setting up storage” in the User’s
Reference.
Note:
Drive letters must match between nodes before you set up clustering.
5.
Configure the network
To configure your network, you will need the following tools: My
Computer and My Network Places.
For detailed instructions, refer to “Completing networking, clustering, and
storage access setup” in the User’s Reference.
IBM TotalStorage
™
NAS Gateway 300 Model G27 Quick Start Instructions
7
