Remove the battery, electronics assembly, or both from the UPS before removing the UPS from the shipping carton or installing or
removing the UPS in the rack.
(D007)
Professional movers are to be used for all relocation activities. Serious injury or death might occur if systems are handled and moved
incorrectly. (D008)
Ensure that your DC mains supply is earthed at the point of generation per IEC 60950-1and ITU-T Recommendation K.27. (D009)
Serious injury or death can occur if loaded lift tool falls over or if a heavy load falls off the lift tool. Always completely lower the lift tool load
plate and properly secure the load on the lift tool before moving or using the lift tool to lift or move an object. (D010)
DANGER
Multiple power cords. The product might be equipped with multiple AC power cords or multiple DC power cables. To remove all hazardous
voltages, disconnect all power cords and power cables. (L003)
Caution notices
A caution notice calls attention to a situation that is potentially hazardous to people because of some existing condition, or to a potentially dangerous situation that
might develop because of some unsafe practice.
The doors and covers to the product are to be closed at all times except for service by trained service personnel. All covers must be replaced
and doors closed at the conclusion of the service operation. (C013)
This product is equipped with a 3-wire (two conductors and ground) power cable and plug. Use this power cable with a properly grounded
electrical outlet to avoid electrical shock. (C018)
This assembly contains mechanical moving parts. Use care when servicing this assembly. (C025)
A caution notice can be accompanied by one of several symbols:
If the symbol
is...
It means...
A generally hazardous condition not represented by other safety symbols.
A hazardous condition due to the use of a laser in the product. Laser symbols are always accompanied by the classification of the laser as
defined by the U. S. Department of Health and Human Services (for example, Class I, Class II, and so forth).
Risk of hand pinching, can trap hands, fingers and cause serious injury. Keep hands clear during operation (L012).
A hazardous condition due to the weight of the unit. Weight symbols are accompanied by an approximation of the product's weight.
A hazardous condition due to the unit's susceptibility to electrostatic discharge.
Possible safety hazards
Possible safety hazards to the operation of this product are:
Electrical
An electrically charged frame can cause serious electrical shock.
Mechanical
Hazards (for example, a safety cover missing) are potentially harmful to people.
Chemical
Do not use solvents, cleaners, or other chemicals that are not approved for use on this product.
Before the library is used, repair any of the preceding problems.
Class I laser product
68
IBM TS22xx Tape Drives
Summary of Contents for TS22 Series
Page 1: ...IBM TS22xx Tape Drives IBM...
