Desktop Features
3.2 Keyboard Summary
Accessibility aid
This feature allows a user with limited motor skills to use
modifier key combinations in a sequential manner rather than in
a simultaneous manner. All modifier key combinations are supported.
There are two operation states—Latch and Lock. The
Latch state
affects only the next key pressed. When in the
Lock state
, all
keys pressed are affected by the modifier until you press the same
modifier key again or press any other modifier key twice. A small icon
indicating the state is displayed on the Keyboard Indicator Line or the
Status Line.
To enable:
Press any modifier key five times.
Latch state:
Press any modifier key once.
Lock state:
Press any modifier key twice.
To disable:
Press and hold a modifier key while you press
another key.
Review previous lines
In Set-Up or through software, you can allocate the pages are assigned
to each session, up to a total of nine pages. When
Review previous
lines
is selected, the page memory allocation for a session becomes a
single page
and a
scroll back buffer.
You can then use
Ctrl
and
Ctrl
keys to scroll up or down to review lines previously scrolled off the
screen. (Note: When this feature is enabled, the host cannot write to
specific pages, and control codes from the host are ignored.)
3–6 Desktop Features
