Chapter 5
Page 55
■
Make the Graffiti character strokes in the Graffiti writing area —
not on the display part of the screen.
■
Make sure you are writing the strokes for letters in the left-hand
side, and the strokes for numbers in the right-hand side of the
Graffiti writing area.
■
Make sure that the Graffiti power writing software is not shifted
into extended or punctuation modes. See “Writing With the
Stylus” for information about shifting into and out of punctuation
modes.
Tapping the screen buttons or icons does not activate the corresponding
feature:
■
Recalibrate the digitizer. Choose Digitizer from the Preferences
application pick list and follow the directions on the screen.
When I tap the
icon, nothing happens:
■
Not all applications or screens have menus. Try changing to a
different application.
A message appears stating that your WorkPad memory is full:
■
Delete unused memos and records. If necessary, you can save
these records on your computer using the Save Backup Copy
option that appears in the Delete dialogs.
■
Purge the Date Book and To Do List applications. This deletes
complete To Do items and past Date Book events from the
memory of your WorkPad. Note that you may need to perform a
HotSync operation to recover the memory.
■
If you have installed additional applications on your WorkPad,
remove them to recover memory.
Beamed data does not transmit:
■
Confirm that the WorkPads are between five centimeters
(approximately 2") and one meter (approximately 40") apart, and
that the path between the two devices is clear of obstacles.
When receiving beamed data an out of memory message appears:
■
Your WorkPad requires at least twice amount of memory
available as the data you are receiving. For example, if you are
receiving a 30K application, you must have at least 60K free.
