806f0a0c-2b810002
An Over-Temperature Condition has been detected on the [PhysicalMemoryElementName] on
Subsystem [MemoryElementName].
Explanation:
IMM determined DIMM 2 in Compute Book 1 has an Over Temperature Condition.
May also be shown as 806f0a0c2b810002 or 0x806f0a0c2b810002
Severity:
Error
Alert Category:
Critical - Temperature
Serviceable:
yes
CIM Information: Prefix:
PLAT and
ID:
0146
SNMP Trap ID:
0
Automatically notify Support:
no
User response:
Complete the following steps until problem is solved:
1.
Check the IMM event log for any fan or cooling related issues.
2.
Make sure that the airflow at the front and rear of the server is not obstructed and that fillers are in place and
correctly installed.
3.
Make sure that the room temperature is within operating specifications.
4.
Check IBM Support site for Service Bulletins/RETAIN tips related to an Over Temperature Condition.
5.
If eXFlash DIMM, make sure the eXFlash DIMM FW is updated to the latest level.
6.
If the DIMM problem persists and there are no other DIMMs with the same indication, replace the DIMM.
7.
If the eXFlash DIMM problem persists and there are no other eXFlash DIMMs with the same indication, confirm
that the eXFlash DIMM is under warranty before replacement.
Related Links:
v
“Server features and specifications” on page 7
v
“Removing a DDR3 compute book” on page 283
v
“Replacing a DDR3 compute book” on page 284
v
“Removing the DDR3 compute book cover” on page 218
v
“Replacing the DDR3 compute book cover” on page 220
v
“Removing a memory module” on page 239
v
“Replacing a memory module” on page 240
v
“Flash DIMMs” on page 51
806f0a0c-2b810003
An Over-Temperature Condition has been detected on the [PhysicalMemoryElementName] on
Subsystem [MemoryElementName].
Explanation:
IMM determined DIMM 3 in Compute Book 1 has an Over Temperature Condition.
May also be shown as 806f0a0c2b810003 or 0x806f0a0c2b810003
Severity:
Error
Alert Category:
Critical - Temperature
Serviceable:
yes
CIM Information: Prefix:
PLAT and
ID:
0146
SNMP Trap ID:
0
Automatically notify Support:
no
User response:
Complete the following steps until problem is solved:
1.
Check the IMM event log for any fan or cooling related issues.
2.
Make sure that the airflow at the front and rear of the server is not obstructed and that fillers are in place and
correctly installed.
3.
Make sure that the room temperature is within operating specifications.
806f0a0c-2b810002 • 806f0a0c-2b810003
Appendix B. Integrated management module II (IMM2) error messages
1163
Summary of Contents for X3850 X6
