enclosure.
Node 2
Node 1
RXE Management Port
RXE Management A
(in) Port
RXE Management B
(in) Port
RXE Management Port
Node 4
B
Node 3
RXE Management Port
RXE Management A
(in) Port
RXE Management B
(in) Port
RXE Management Port
1. Using an RXE Management cable, connect the RXE Management Port
connector on one server to the remote I/O enclosure.
2. Using an RXE Management cable, connect the RXE Management Port
connector on the other server to the remote I/O enclosure.
Power cabling
Your server comes with two power cords that can be connected to an external
source, such as a properly grounded electrical outlet. Your server can also use two
power cords that can be connected to a primary power unit inside the rack cabinet,
such as a properly grounded power distribution unit or uninterruptible power supply.
Complete the following steps to connect the power cords:
1. Connect the power cords to the system power connectors on the rear of the
server.
Notes:
a. The power supplies are hot-swappable and redundant only at 200-240 V ac.
b. Both power supplies must be connected to the power source for operation at
100-127 V ac.
c. During normal operation, both power supplies must be installed for proper
operation.
2. Connect the other end of the power cord to a properly grounded electrical outlet
or a power distribution unit inside the rack cabinet.
Note:
Connecting the power cords into an electrical outlet might cause the
server to start automatically. This is an acceptable action.
54
xSeries 455: Option Installation Guide
Summary of Contents for xSeries 455
