Information capture. Done right
™
866-798-4265
www.ibml.com
7
Section Three: Unpacking the ImageTrac Series 6 Scanner
Unpacking the system, crated or uncrated, requires a minimum of
two
people.
International Shipments (Crated)
1. Using an 8mm wrench, remove the four panel brackets to remove the
FRONT
panel of the crate.
2. Each ImageTrac frame will be tightly packed in a crate. To remove the frame from the crate, begin pulling the frame toward you while gently
rocking it left to right and walking the frame out of the crate. The packing crate is supported on the bottom by four nonskid feet which raises the
bottom of the crate about three inches. Because of this, each frame will need to be gently lowered to the floor as it exits the crate.
3. Remove all packing materials from around the frame. The frame may now be placed in position on the floor.
