6
Maximum length of the cable in meter depend of
diameter separately wire of cable
Voltage
1 phase
Power
of motor
[kW]
1
mm
2
1,5
mm
2
2,5
mm
2
4
mm
2
6
mm
2
10
mm
2
16
mm
2
230-240 V
0,37
50
75
125
230-240 V
0,55
40
58
94
150
230-240 V
0,75
30
46
74
121
174
230-240 V
1,1
21
32
50
86
125
215
230-240 V
1,5
22
37
62
90
155
245
230-240 V
2,2
30
45
67
115
180
Non-compliance with the above instructions on selection of cable
reduces the voltage excessively and in consequence overloads and
damage the motor.
The pump is originally fitted with a short section of the cable. Depending on the user’s
needs the cable is extended. Water tight connections of cables must be executed by a
person having proper knowledge and experience. The user should commission the
assembly to a well driller company or can do it in a store he bought the pump.
Non-professional connection and insulation of the cables may cause that the
residual current devices will knock out, the motor will be flooded or the user
may suffer electric shock.
STORAGE:
Clean pump must be stored in a dry place.
Make sure that the pump is placed on even surface on entire length. The
pump’s support in one or several points may bend the pump and cause
damage.
EQUIPMENT DISPOSAL:
The used product must be disposed as waste exclusively in selective
waste collection organized by the Public Network of Electric and
Electronic Waste Collection Points. The consumer may return the used
equipment to the distributor of electric equipment, at least free of charge and
directly provided that the equipment is of the right type and the same functionality
as the newly purchased one.
DECLARATION OF CONFORMITY EC (Module A):
PHU DAMBAT
address: Gawartowa Wola 38, 05-085 KAMPINOS, POLAND
Pursuant to the act of 30th August 2002 on conformity system (Journal of Laws of 2004 No.
204,item 2087) with full responsibility we declare that the pumps are from series 4SG, 4SDm, 4SD,
90QJD, 3ti, 4SKm, 4TP, 90MSC
to which this declaration refers comply with the following directives of the European Parliament
and Council, relating to:
1) machines no. 98/37/EC (norms applied: PN-EN292-1:1991, PN-EN292-2-1991/A1:1995, PN-
EN 809:1999/AC:2004)
2) electromagnetic compatibility no. 89/336/EEC (norms applied: PN-EN 55014-1:2004, PN-EN
61000-3-2:2004)
3) electric equipment applied within certain limits of voltage no. 73/23/EEC (norms applied: PN-
EN 60335-1:2004, PN-EN 60335-2-41:2005)
Adam Jastrz
ę
bski
17.06.2008
