41
Electric connection
Pump body and motor body thermal instalation
Electric connection
The electric connection and protection must follow the ocal regulations.
In order to limit heat losses at the heating
medium flow hrough the pump, the pump
and motor body can be thermally insulated
by means of, for example, a Styrofoam lining.
Do not insulate or cover the junction box or
the control panel.
NOTE
CAUTION
The electric pump must be connected to an earthing conductor
The pump must be connected to the external power supply breaker.
The minimum slit between the pins of the breaker must be 3 mm.
1
2
3
Installation position
Point the plug at the socket of the
control box and push it in.
Complete assembly
electrical
connection
OK
signal PWM
connection
