Manual de Operação - SONOPEEL
1
a
edição (10/2009)
32
Figure 13.
Spatula for ultrasonic peeling, sonophoresis, combined therapy and isolated
therapy.
1- On-off power switch.
2- Luminous indicator showing that the equipment is “turned on”.
3-
BACK
and
NEXT
control keys.
4-
SET+
and
SET-
control keys.
5- Alpha numerical liquid crystal display.
6-
START
/
STOP
control keys. The same key has two functions:
START
the
treatment ,
STOP
the treatment.
7-
UP
and
DOWN CURRENTE INTENSITY
control keys (µA) current intensity
MENS
(microcurrent) or of
GMES
current (microgalvanic).
8- Luminous indicator (yellow) of the current channel (MENS or GMES) of the
presence of an output current intensity for the patient. Whenever the equipment is with
intensity current this indicator will remain alight.
9-
UP
and
DOWN PEELING INTENSITY
control keys – emission intensity of
ultrasound peeling. There are three “
Steps”
of intensity:
Low, Medium
and
High.
10- Patient’s cable connection (black colored channel) for electrostimulation by
MENS or GMES current.
11- Spatula transducer connection of ultrasound peeling.
12- Power cable connection to be connected to the local power supply line.
13- Fuse rack – (See chapter
SONOPEEL
– Electrical feed).
14- Characteristic board of line tension.
