background image

Operating Instructions IBS-Parts Cleaner Type BK 50 (IW/V4.0/10-2012/EN) 

Page 

 

4. Transport _____________________________________________  

 

4.1.

 

Handling

 

  Carefully transport the unit to the customer’s setup location to prevent any damage to the 

unit. 

  Secure the unit to the pallet to prevent it from sliding. 

NOTICE

   If the drum is removed, one person can transport the unit to it´s setup location. 

 

  When transporting the drum, please follow the safety instructions on the solvent’s data 

sheet. 

 

4.2. Transport Aids 

4.2.1. Transport using a crane 

  Attach crane cables to the pallet and carefully raise the unit  Pay special attention to the 

unit’s center of gravity.  The unit may tip over! 

 

NOTICE

   The crane must have a carrying capacity of at least 200 kg. 

 

4.2.2. Transport using a forklift 

  Guide the forklift between the longitudinal braces of the wooden base of the pallet. 

  Lift the unit and transport it. 

 
 

 

5. Setup / Startup ________________________________________  

 

5.1.  Securing the Unit / Stability 

The unit must be placed in a level and stable location on a solvent-resistant floor .

 

 

5.2. Space Required 

The unit may be placed in front of a wall. There should be approx. 1.5 metres of free space in 
front of the unit.

 

 

5.3. Acceptable Ambient Conditions 

The unit will work optimally at temperatures b10° and +30°C. 

 

5.4. Connection Conditions 

 

 

 
A professional electrician must perform the installation of electrical supplies for the 
customer. 

DANGER

 

 
  

 

The electrical supply line is to be installed in accordance with all regulations and the information 
(technical data) in the instruction manual. 

 
 
 
 
 
 
 
 

Summary of Contents for BK 50











Reviews: