background image

Operating Instructions IBS-Parts Cleaner Type BK 50 (IW/V4.0/10-2012/EN) 

Page 

 

5.4.1

 

Prevention of electrostatic charge  

 

5.4.1.1. Self-priming pump 

The discharge of the IBS Special Pump´s electrostatic charge will be transmitted by protective 
conductor of the self-priming pump (socket) 
 

5.4.1.2. Parts Cleaning Device

 

The Parts Cleaning Device must be connected to an 
equipotential bonding by the customer (which is 
connected with the grounding of the building)                      
(please see picture on the right). This should be done 
by a skilled electrician. 

 
 

5.5.  Components / Add-Ons 

 

5.5.1. IBS catch basins Type WK-50 (optional) 

The prototype-tested catch basins prevent the solvent from penetrating the floor in case of 
spilling or leakage.

 

 
 

5.6. Waste Disposal 

  The unit is constructed primarily of steel (except for the electrical components) and should 

be disposed of in accordance with applicable local environmental regulations. 

  Contaminated parts (e.g. hoses, cleaning brushes, cleaning cloths etc.) should be disposed 

of in accordance with applicable environmental regulations. 

 

Please contact IBS Scherer GmbH if you have any queries regarding disposal.

 

  IBS Scherer will take back used drums containing waste solvent and recycle the liquid 

providing the customer has not introduced other (chemical) materials. 

  If you decide to use solvents by other manufacturers, it is crucial that you follow the safety 

instructions provided by the manufacturer. 

 

5.7.  Operator Precautionary Measures 

A 5-metre radius around the unit must be declared as danger zone.

 

 

The resulting danger zone: 

  has to be marked as a fire hazard area because the solvents are inflammable, 

  has to be kept free from any objects to allow for unhindered access to the unit at any time, 

  and must have an effective means of natural ventilation. 

 
 

 

 

Smoking is prohibited in the danger zone. Avoid open flames or other sources of 
ignition. 

 

Keep everything as clean as possible when working with solvents, oils and 
lubricants. 

 

Personnel operating or maintaining the machine must be trained beforehand.  This 
instruction manual must be attached to the unit. 

DANGER 

 

 

All IBS-Parts Cleaners have been tested and certified. 

 
 
 
 

 

 
 

Summary of Contents for BK 50











Reviews: