Operating Instructions IBS-Parts Cleaner Type BK 50 (IW/V4.0/10-2012/EN)
Page
8
6. Operating the Machine _______________________________
6.1. Machine Features
Use the foot-operated safety switch to turn the machine on.
6.2. Assembling and Adjustment
6.2.1. Assembling the parts cleaning device
•
Remove all packaging materials.
•
Insert the two base legs
(1)
into the round pipe sleeves
(2)
underneath the basin.
•
Secure the cross braces
(3)
to the base legs
(1)
.
•
Place the assembled unit above the drum
(5)
.
6.2.2. Assembling the pump
•
Tilt the drum
(5)
slightly, guide the self-priming pump into the drum, and put the pump into
the 2“ plug. Make sure that the outgoing lines for the pump
(12)
face to the left.
•
Insert the return hose
(9)
into the opening of the ¾“ plug.
•
Secure the top end of the return hose
(9)
to the basin’s drain connection piece
(10)
.
•
Attach the brush hose
(11)
to the pump
(12
)
.
•
Guide the brush hose
(11)
through the round back wall opening of the basin
(13)
and insert
the cleaning brush
(14)
into the hose.
•
Place the safety foot switch
(7)
in front of the unit.
•
Plug the plug
(15)
into the 230 V-outlet.
•
Perform a function test
6.2.3. Startup
•
Place the workpiece you intend to clean onto the support grate.
•
Step on the foot pedal switch to turn the unit on.
•
Use the brush to clean the workpiece.
•
Release the foot switch to turn the pump off.
NOTICE
Please complete and sign the attached
warranty card
and return it to IBS Scherer
GmbH.
1
1
10
2
3
5
9
13
11
7
complete
pump
15
1
4
11
