Operating Instructions IBS-Parts Cleaner Type BK 50 (IW/V4.0/10-2012/EN)
Page
9
6.3. Finding and Troubleshooting Problems
Problem Cause
Solution
Pump does not work
•
No
power
•
Check whether unit is plugged in
•
Pump is defective
•
Replace
pump
If the measures shown above do not solve your problem,
please contact BS Scherer GmbH.
6.4. Notes on Personal Protective Gear
Wear appropriate protective gear (e.g. safety glasses, gloves, apron etc.) when handling
solvents.
7. Inspection / Maintenance _____________________________
7.1.
Inspection
An experienced IBS trained technician should inspect the unit at least
every 12 months
.
The examination of the IBS Parts Cleaning Devices, as stationary or moveable electrical
devices, has to be effected by the operator.
7.2. Maintenance
Depending on the type of application, the degree of contamination and duration of use, the
cleaning liquid must be exchanged by means of changing the drum. The unit must be
disconnected from the power supply before the drum is changed. Clean the unit regularly using
a cloth and/or cleaning solution. Original replacement parts must be ordered from IBS Scherer
GmbH, otherwise the warranty will be void.
8. Spare Parts and Accessories _________________________
The spare parts and accessories list for IBS Parts Cleaner Type BK 50
Article-No.
Article-Name
2222081
SAP (Self priming pump with) type BK 50 without foot switch
2222080
SAP-pump type BK 50 with foot switch
2222064
Self priming pump complete with foot switch (pneumatic)
2222019
Support grate (perforated sheet)
2222008
Cleaning brush, fine – 50 mm bristles
2222009
Cleaning brush, coarse – 50 mm bristles
2222022
Safety foot switch, with cover
2221012 Return
hose
2222033
Thread plug ¾“- return flow connection for BK 50
2222004
Brush hose, 1,5 m
2222012
accessory
Special parts cleaning gloves (solvent-resistant)
9700014
accessory
Operating Instructions for IBS Parts Cleaners