manualshive.com logo in svg

IC Bus BE Series, Operation And Maintenance Manual

The Modena BE Series user manual is a comprehensive guide that enables users to effortlessly install, navigate, and maintain their Modena BE products. This essential manual can be easily accessed and downloaded for free from our website, ensuring a hassle-free user experience.

Share
Download
background image

Index

D

(CONT.)

Door Opening / Closing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67

Opening / Closing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67
Three-Position Door Switch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68
Two-Position Door Switch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68

Door Opening and Closing Speed Adjustment Points. . . . . . . .157

Closing Speed Adjustment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .158
Opening Speed Adjustment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .158
Pressure Regulator Adjustment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .157

Downhill Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114
Drive Shaft. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .175
Driver Heater. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .103
Driver Seat Adjustment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79

Seat Height Adjustment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80

Driver Seat Belts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82
Driver Visual Warning Lights and Indicators. . . . . . . . . . . . . . . . . . . .73
Driver’s Adjustable Lap and Shoulder (Three-Point) Belt. . . . . .82
Dual Tires Matching. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .183
Dual Tires Mixing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .183

E

Economy Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .131
Eight-Lamp AMBER and RED Warning Lights. . . . . . . . . . . . . . . . .70
Electric-Actuated Door. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69
Electrical. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .166

Accessory Feed Connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .166
Alternator–Starter–Battery Test. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .166
Terminal Inspection–Cleaning–Corrosion Protection. . . . . . .166

Electrically Actuated Entrance Door Adjustment. . . . . . . . . . . . . .158
Electronic Safety Messages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69
Emergencies While Filling With Propane Autogas. . . . . . . . . . . .113
Emergency Door. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77

E

(CONT.)

Emergency Equipment (Recommended On-Board). . . . . . . . . .133

Body Fluid Cleanup Kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .134
Fire Extinguisher. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .133
First Aid Kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .134
Reflective Triangle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .134

Emergency Exit Windows. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .78

Vertical Emergency Exit Window. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .78

Emergency Exits. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77

Emergency Door. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
Emergency Exit Windows. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .78

Vertical Emergency Exit Window. . . . . . . . . . . . . . . . . . . . . . . . . . . .78

Roof Vent / Hatch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .78

Emergency Exits and Equipment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

Emergency Exits and Equipment Table. . . . . . . . . . . . . . . . . . . . . . .21

Emergency Exits and Equipment Table. . . . . . . . . . . . . . . . . . . . . . . . .21
Emergency Starting Using Jumper Cables. . . . . . . . . . . . . . . . . . . .144
Emission Control Systems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

HD-OBD Foreword. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Supplemental Federal Emission Control System Warranty. . .5

Engine. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .166

Air Cleaner Element Service. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .168
Air Induction System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .167
Air Restriction Gauge Service. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .168
Chassis-Mounted Charge Air Cooler and Radiator Core

Inspection and Cleaning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .170

Cooling System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .171
Drive Shaft. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .175
Engine Oil. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .174
Frame and Optional Tow Hooks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .176
Fuel System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .174
General. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .166

218

Summary of Contents for BE Series
















































































































































































































































Reviews:

No comments

Related manuals for BE Series

Brands by name

Popular brands

Load more brands