manualshive.com logo in svg

IC Bus BE Series, Operation And Maintenance Manual

The Modena BE Series user manual is a comprehensive guide that enables users to effortlessly install, navigate, and maintain their Modena BE products. This essential manual can be easily accessed and downloaded for free from our website, ensuring a hassle-free user experience.

Share
Download
background image

Index

E

(CONT.)

Engine (cont.)

Gravity-Fill Coolant Method (PSI 8.8L LPG Engine). . . . . . .171

Contamination of Coolant. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .173
Coolant Concentration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .172
Fan Clutch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .173
Filling Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .171

Heater and Coolant Hose Inspection and Replacement

Guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .173

Heater System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .175
Integrated Air Conditioning (IC Air) System. . . . . . . . . . . . . . . . .175
PSI 8.8L LPG Engine. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .167
SAE Oil Viscosity Grades. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .174
Scheduled Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .167
Suspension (Air and Steel Springs). . . . . . . . . . . . . . . . . . . . . . . . . .176

Engine Compartment Fluid Check Points. . . . . . . . . . . . . . . . . . . . . .156
Engine Crankcase. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .200
Engine Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .109

HD-OBD Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .109
Self Diagnostics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110

Engine Oil. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .174
Exterior. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .151

Crossing Arm Cleaning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .152
Waxing or Polishing Vehicles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .152

Exterior Checks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Exterior Checks Table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Exterior Checks Table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Exterior Lamp Check. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66

Activation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66
Deactivation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66
Function. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66
Switch Location. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66

F

Fan Clutch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .173
Filling Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .171
Filter List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .212
Fire Extinguisher. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .133
First Aid Kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .134
First Respondent and Operator Warning. . . . . . . . . . . . . . . . . . . . . .135

Chassis Fuse / Circuit Breaker Chart. . . . . . . . . . . . . . . . . . . . . . . .136
Fuse Description Chart Table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .138
Power Relays Table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .137

Flashing Stop Arm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72
Flooring. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .151
Fluid Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .165
Frame and Optional Tow Hooks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .176
Front / Rear Suspension Table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Front Axle – Alignment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .159
Front Axle – Inspection and Lubrication. . . . . . . . . . . . . . . . . . . . . . . .158
Front Axle – Normal Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .159
Front Suspension. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

Front / Rear Suspension Table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

Fuel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110

Fuel and Blends. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110
Fueling Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .111
Fueling Procedures. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .112
Unacceptable Fuel And Blends. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110

Fuel and Blends. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110
Fuel System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .174
Fueling Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .111
Fueling Procedures. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .112
Full Power Brakes – Brake Fluid. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .200
Function. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66
Fuse / Circuit Breaker Charts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .135

Body Fuse / Circuit Breaker Panel. . . . . . . . . . . . . . . . . . . . . . . . . . .139

219

Summary of Contents for BE Series
















































































































































































































































Reviews:

No comments

Related manuals for BE Series

Brands by name

Popular brands

Load more brands