manualshive.com logo in svg

IC Bus BE Series, Operation And Maintenance Manual

The Modena BE Series user manual is a comprehensive guide that enables users to effortlessly install, navigate, and maintain their Modena BE products. This essential manual can be easily accessed and downloaded for free from our website, ensuring a hassle-free user experience.

Share
Download
background image

Index

T

(CONT.)

Torque Specification Charts (cont.)

Disc Wheels Torque Chart. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .210
Seat Base Bolts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .212
Steering Column Pinch Bolts Torque Chart. . . . . . . . . . . . . . . . .210
Wiper Arm Torque Chart. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .212

Towing Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .145

Towing Preparation: Air Parking Brakes. . . . . . . . . . . . . . . . . . . . .147
Towing Preparation: Hydraulic-Powered Parking

Brakes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .147

Towing Vehicle With Front Wheels Suspended. . . . . . . . . . . . .148
Towing Vehicles With Rear Wheels Suspended. . . . . . . . . . . .148

Towing Preparation: Air Parking Brakes. . . . . . . . . . . . . . . . . . . . . . .147
Towing Preparation: Hydraulic-Powered Parking Brakes. . . .147
Towing Vehicle With Front Wheels Suspended. . . . . . . . . . . . . . .148
Towing Vehicles With Rear Wheels Suspended. . . . . . . . . . . . . .148
Track Seat Mounting Seat Type Specific. . . . . . . . . . . . . . . . . . . . . . . .99
Traction Control (If Equipped). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .125
Traffic Warning System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69

Eight-Lamp AMBER and RED Warning Lights. . . . . . . . . . . . . . .70
Electronic Safety Messages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69
Optional Rocker Switches. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70
WIG WAG Warning System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71

Transmission. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .179, 201

Transmission Fluid Level. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .179
Transmission Table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .201

Transmission Fluid Level. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .179
Transmission Table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .201
Transmission, Parking Brake, and Ignition Switch Panel. . . . . .54
Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .169
Turn Signal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48
Turn Signal Switch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64

HI / LO Beam. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65

T

(CONT.)

Turn Signal Switch (cont.)

Lane Change. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65
Signaling for a Turn. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64

Turning Off the Engine. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114
Two-Position Door Switch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68
Typical Propane Autogas Fuel Tank Configuration. . . . . . . . . . . . .11

U

U.S. Registered Vehicles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Unacceptable Fuel And Blends. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110
Unbuckling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87
Underhood and Fluid Checks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Underhood and Fluid Checks Table. . . . . . . . . . . . . . . . . . . . . . . . . . .17

Underhood and Fluid Checks Table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Underinflation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .182
Unit Refill Capacities. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .200

Air Conditioner Refrigerant. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .200
Cooling System Refill Capacities. . . . . . . . . . . . . . . . . . . . . . . . . . . . .200
Engine Crankcase. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .200
Full Power Brakes – Brake Fluid. . . . . . . . . . . . . . . . . . . . . . . . . . . . .200
Power Steering System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .200
Rear - Axle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .200
Transmission. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .201

Upholstery Care. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .150
Use of Tire Chains. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .184
User Switches. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
Using Air Brakes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119
Using the Air Parking Brake. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119

Air Brake Gauge. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .120
To engage Air Parking Brake. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .120
To release Air Parking Brake. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .120

Using the Full Power Brake System. . . . . . . . . . . . . . . . . . . . . . . . . . . .115

226

Summary of Contents for BE Series
















































































































































































































































Reviews:

No comments

Related manuals for BE Series

Brands by name

Popular brands

Load more brands