Operation
Allison Transmission Mechanical Lever Shifters
1.
Apply the service brake and press and hold the button
on the gearshift lever handle.
2.
With the brake still applied, continue to hold the gearshift
lever button while moving the gearshift lever to Reverse
(R) or Drive (D) position, and then release the button.
•
For Air Brakes,
push in on the Parking Brake knob (Park
indicator on Instrument Panel Gauge Cluster will turn off).
•
For Hydraulic Brakes,
push and hold the Parking Brake
knob, (Park indicator on Instrument Panel Gauge Cluster will
turn off).
3.
Lift foot from the brake pedal, and then slowly press the
accelerator pedal.
Allison Generation IV Push-Button Shift Selector
1.
Digital Display
2.
Mode ID
3.
Mode Button
4.
Range Selector Buttons
•
To shift the transmission into “R” (Reverse) or D (Drive),
press the brake pedal, then press “R” or “D,” then release
the brake pedal.
•
To select a lower range when in “D” (Drive), press the
down-arrow button.
•
To select a higher range when locked in a lower range, press
the up-arrow button.
•
To place the transmission in “N” (Neutral), press “N.”
128
Summary of Contents for BE Series
