4
Disengaging the Auto Cold Start feature:
Any of the following actions will cancel the
Auto Cold Start feature:
Press and hold buttons 1 & 3 together for 3
seconds or press the brake pedal or turn the
ignition on.
• The parking lights flash twice and horn
honks twice to confirm deactivation.
SAFETY FEATURES
The vehicle will not remote start if the brake
pedal is pressed, if the hood is open, or if the
system is in Valet mode. Also, if the brake is
pressed or the hood is opened while remote
running, the remote start will shut down.
BASIC TWO CAR OPERATION
Two cars with the same system can access
basic keyless entry features using a single
transmitter. To program Two Car operation,
get all transmitters ready (up to 4) and fol-
low the steps below.
1. Program car 1’s original two transmit-
ters as shown in steps 1 and 2 for
Adding Transmitters.
2. Program car 2’s first transmitter into
car 1 by pressing Button 3.
• The siren chirps once.
3. Program car 2’s second transmitter into
car 1 by pressing Button 3.
• The siren chirps once.
4. Turn off the ignition.
• The siren will chirp once.
Car 1’s transmitters will now operate car 1
normally and car 2’s transmitters can now
operate car 1 as follows:
To Lock- Press buttons 1&3 together on Car
2 transmitter.
To Unlock- Press buttons 2&3 together on
Car 2 transmitter.
To Panic- Press buttons 1&3 together on Car
2 transmitter for 3 seconds.
To Start- Press buttons 3&4 together on Car
2 transmitter.
RS160manualRev3:BW2450.qxd 1/7/2010 2:24 PM Page 4
Summary of Contents for RS160
Page 14: ...14 NOTES ...