22
23
7. Functions and operation
7. Functions and operation
7-11.INITIALIZE
7-12.EXIT
5. Camera Name Input process is finished if user selects ‘RETURN’ and presses OSD
switch.
(5) FIRMWARE:
- Shows firmware version of this camera unit.
(6) 485 TERM
- RS485 Function ON/OFF
(7) BAUD RATE
- Selects baud rate for RS485 communication among 2400/ 4800/ 9600. (Default:9600)
(8) SYSTEM RESET
- Resets all setting of SYSTEM menu.
CAMERA ID, 485 TERM settings are not initialized.
(9) RETURN
- Returns to the MAIN MENU.
(4) NAME DISPLAY
-If you enter a title for this, that will appear on the monitor.
1. Please position the cursor on ‘NAME DISPLAY’ by
moving UP or DOWN direction.
2. Then, select ‘ON’ by using the LEFT and RIGHT selection.
When you press the button to complete ‘ON’, then
‘CAMERA NAME’ will be displayed.
තG
NOTE
·
If ‘OFF’ is selected, the NAME DISPLAY does not appear on the monitor even if it has
been input.
3. Up to 10 letters are available for the NAME DISPLAY.
ྙGwGGGGGGGGG
using the UP and DOWN selections.
ྚGzGGpkGGWSXS¥_S`SGhSiSG¥SG
using the UP, DOWN, LEFT and RIGHT selections.
ྛGsGGGG GGGU
GGGG~GGGGGSGGGGGGGU
ྜGwGGGGGGuhtlGkpzwshU
4. When a name has been chosen, please select a position for the name to display.
ྙGwGGGGG
‘POSITION’ and then press the button.
ྚG{GGGGGGGGU
ྛGwGGGG GGG GGG GGG[G
selections, and then press the button to finish.
Resets the camera setting to the factory defaults.
CAMERA ID, 485 TERM settings are not initialized.
(1) SAVE/EXIT
TGzGGGGGGGU
(2) EXIT
TGuGGGGGGGGU
(3) RETURN
- Returns to the MAIN MENU.
Summary of Contents for Full HD(HD-SDI) CCTV Box Camera
Page 14: ...28 29 MEMO MEMO ...
Page 15: ...30 31 MEMO MEMO ...
