5
This step doesn
’t have to be necessary, please install the device according to the actual
product.
Step 4
Adjust the dome pedestal location according to the
clients’ requirement of top outlet or side
outlet, pull out the cable from the side cable slot between installation surface and pedestal
(please skip this step if it is top outlet), aim the screw fixing holes on the pedestal at the
expansion bolt fixing holes on the installation surface, then tighten the three self-tapping
screws into the expansion bolts and fix them firmly, fix the pedestal on the installation surface.
Step 5
Aim the enclosure and dome body at the pedestal upward, pull the cable through the outlet on
the installation surface (please skip this step if it is side outlet), then install the enclosure on the
pedestal.
If it is metal enclosure, then screw it counterclockwise into the pedestal.
If it is plastic enclosure, then buckle the enclosure and dome body into the pedestal.
Step 6
Adjust the camera to a proper location for monitoring via rotating enclosure and dome body.
So far, the installation for dome camera is completed.
