86
Parameter
Function
NAS enable
Please select network storage protocol and then enable
NAS function. The network storage protocol includes
FTP.
Server IP
Input remote storage server IP address.
Port
Input Remote storage server port number.
User Name
Log in user account.
File length
The max files length when you transfer the file. When
the input value is 0, then system upload the whole files.
Password
The password you need to login the server.
Remote Path
Remote storage file path.
Setup
z
In NAS interface, click set button, you can go to the
corresponding setup interface. See Figure 7-29.
z
Please set schedule period and then select
corresponding record type: schedule/alarm. Please
note device does not support motion detect record
function now.
z
Please select date (Current setup applies to current
day by default. You can draw a circle before the week
to apply the setup to the whole week.)
z
After complete setup, please go back to Figure 7-28
and then click save to save current time period setup.
Save
You can click save button after you complete setup for
one channel, or you can complete the whole setups and
then click save button.
Refresh
Click this button to get device latest configuration
information.
NTP
The NTP interface is shown as in
328H
Figure 7-30.
Here you can realize network time synchronization. Please enable current function and then
input server IP, port number, time zone and time.
