iCanServer440R User’s Guide
‘PPPoE’ in the network type. Next, fill in the ‘User Name’ and ‘Password’ fields with the
values assigned by the network service provider.
-
When the network environment is “automatic IP allocation by DHCP”, select ‘DHCP’ in the
network type.
y
Refer to
[IP-installer user’s guide]
for “Clone MAC”.
y
Refer to
[IP-installer user’s guide]
for “Host name and domain for Cable Modem”.
y
E-Mail Setup
-
Recv E-Mail Address : Refer to
[IP-installer user’s guide]
for “Recv E-Mail Address”.
-
Return E-Mail Address : Refer to
[IP-installer user’s guide]
for “Return E-Mail Address”.
-
Notify for IP Changed : If this is checked, the IP address will be sent via E-mail whenever
the IP address changes. It is sent to the E-mail address set by
“Recv E-Mail Address”.
. Title : It is the predefined title of the e-mail message sent to user.
. Message: It is the pre-defined content of the e-mail message sent to user.
y
Port Change :
You can change the HTTP port, RTSP port, RTCP, and Web hard port numbers.
The RTSP port is used to connect the “Viewer“ to the iCanServer440R. WebHard
is a space allocated for user data storage on the HDD of the iCanServer440R.
Each port should have a number below # 65535. Refer to [IP Installer user’s
guide] on the CD for more information.
-
HTTP : default “80”
-
RTSP : default “554”
-
RTCP : default “6971”
-
WebHard : default “6971”
y
Management Server
:
You can register the iCanServer440R to Management Server for various support such as
domain name service. One of the server available for the service is
mgmt.net-video.net
.
-
Log on to server : Check this box to enable log on to the Management Server and input
Server name. You can select : mgmt.net-video.net for the service. You should
register your iCanServer440R to the management server before using this
feature. When you choose mgmt.net-video.net, connect to www.net-
Rev.2.0 (Aug. 2004)
25
