iCanServer440R User’s Guide
-
Add User
.
Username : Enter the user ID you want to add. Up to 100 users are supported by
iCanServer440R.
.
Password: Enter the user password.
. Attribute : You can set different system resource access capabilities for each of the user.
Attributes are Audio, Bi-directional Audio and Pan/Tilt.
For example, if you want a specified user to hear the audio from the
iCanServer440R, check Audio in the check box.
-
User List :
You can list “user ids” and “ their attributes” here.
format : user id[A, BA, P] : A – audio, B – bi-directional audio, P – ptz, attribute.
you can delete specific user by clicking the “DELETE” button.
y
Authentication for Viewing
: If you want to restrict viewing access to the iCanServer440R,
check “Yes” box and click on “Save”. Users need to input ID and
password to connect to iCanServer440R in viewing mode.
(Figure 26.)
Figure 5-6. User Authentication in iCanServer440R
-
If No, default attribute : If you uncheck the above “Yes”, every user can access the
iCanServer440R without restriction with the same attribute set
in here. You can enable by checking each attribute and clicking
button.
Even if you have added a user through authentication for viewing connection to the
iCanServer440R will not be enabled unless you check “Yes” in “
Authentication for
Viewing”
and click on the “Save” button.
y
Time Setup
-
Current Time
:
It shows you the current time of iCanServer440R.
Rev.2.0 (Aug. 2004)
28
