iCanServer440R User’s Guide
5.7. Motion Region Setup
Set the motion detection regions. Up to 3 regions can be defined.
Figure 5-9. Motion Region Setup
y
Channel Selection
: Choose the channel you want to enable motion detection.
y
Channel Sensitivity
: Set the sensitivity in motion detection for each channel.
-
0 is the most sensitive number, and 15 is the least sensitive number.
-
Sensitivity values can be set to be different among channels, but same sensitivity is applied
for regions.
y
Motion Region Setup
: Set up the motion detection region up to 3 per each video channel
-
Region 1, 2, or 3 : Motion detection is enabled for the channels by checking each box.
. You can set the region by pressing the “START” button, and click one corner of region in
the left viewing. It will show the coordinate value automatically. Next you press the
“END” button, and click the other diagonal corner.
Rev.2.0 (Aug. 2004)
32
