iCanView290PT/290PTW User’s Guide
Figure 2-3. Connecting Network camera and PC using PoE Power Adaptor
Figure 2-4. Connecting Network camera and PC using PLC Adaptor
1.
<Caution>: Note: iCanTek cameras use proprietary PoE technology. Using a third
part PoE product with iCaNtek cameras will damage the camera and void the
warranty.
2.
Apply power to iCanView290PT/290PTW
3.
Install “IP installer” and “i-NVR” on your PC.
Detailed information for installing these programs can be found in
[IP-Installer User’s
Guide]
and
[i-NVR User’s Guide]
, respectively.
4.
Assign IP address to iCanView290PT/290PTW using IP installer.
Identify the type of the network environment and set up IP address. Detailed process of
setting up IP address can be found in
[IP-Installer User’s Guide]
.
If network type is
xDSL or Cable modem you need supplementary information provided by your ISP.
5.
Connect to iCanView290PT/290PTW in Administrator Mode for initial parameter
Rev.1.0 (Jun. 2007)
15 of 55
