iCanView290PT/290PTW User’s Guide
Notify for IP
Change
Checking this, sends an E-mail whenever the IP address
changes. It is sent to the E-mail address specified by the
“Recv E-Mail Address”.
Recv E-Mail
Address
Enter the “send to” E-mail address. This is same as E-mail
field in IP-installer.
Return E-Mail
Address
Fill in this field with correct e-mail address to identify the mail
sent from the network camera. Some ISPs require this.
Using Built-in
SMTP Server
If you are using web mail services, no SMTP server, check the
radio button at the left of “Using Built-in SMTP Server”
and enter valid e-mail address to avoid spam filtering on the
receiving e-mail server.
E-Mail Setup
Using External
SMTP Server
If you are using an external mail server, fill in the fields with
proper parameters.
FTP Server
Setup
Setup IP address, Username, Password and Directory of FTP
server to send data in case of alarm. Default FTP port number
is 21.
You can register the network camera on the iCanTek
Management Server (DDNS Server) for domain name service
to your network camera.
Management
Server
Log on to
server
Check this box to enable log on to the management server. By logging
on to the management server your network camera can use a domain
name instead of a numeric IP address. This feature is particularly
useful when your network camera is using DHCP (dynamic IP address).
Input a valid management server (DDNS Server) name for the service.
You must have an account on the management server (DDNS Server)
and register your IP video devices under your account to use this
feature.
The domain name of your network camera can only be assigned when
you register your network camera to the management server under
your specific account.
One of the servers available is
mgmt.net-video.net
. For opening an
account, visit
www.net-video.net
.
Rev.1.0 (Jun. 2007)
31 of 55
