2011.01.19 411ZA/811ZA/611ZA Quick Start Guide V1.0(N04)- P.13
Switch to the PTZ mode by pressing
“PTZ” button under the LIVE mode. The PTZ icon
will appear on upper left side of screen and the control panel will appear on the down right side
of screen.
Table 8-1
Mouse operation under the PTZ mode
Icon
Description
Leave PTZ Mode
，
back to the LIVE mode
Pre-set number N. (0~255)
Go to pre-set number N.
Set current PTZ location at pre-set number N.
「
TOUR
」
，
press to activate pre-set tour
＊
「
PIP
」，
Set current PTZ location as the start of line-scan.
＊
「
FREEZE
」
，
Activate line-scan.
＊
「
ZOOM
」
，
Set current PTZ location as the end of line-scan.
＊
To move PTZ in 360
°
PTZ zoom in; PTZ zoom out
PTZ focus in; PTZ focus out.
PTZ IRIS open, PTZ IRIS close.
Below functions need support from specific PTZ manufacturer.
Please check user manual of your PTZ for more detail.
to
AUX 1~8,
「
AUTO
」
Key
＋
Number key
「
1~8
」
「
Backup
」
, Customized function
。
＊
PTZ communication protocols from different brands aren
’t compatible 100%
sometimes. Therefore, some of these functions may be unavailable.
